To familiarize yourself with the instruction manual for solid fuel boilers Marten, click on the corresponding picture:

                              

Industrial boiler Marten Industrial MI - 350 kW is the optimal solution for heating areas up to 3500 m sq. M. It can be either private houses, or industrial premises, warehouses, office premises, car washes, etc.

The main types of fuel: firewood, coal, briquettes.

The solid-fuel boiler Marten Industrial MI-350 with a capacity of 350 kW has a large fuel loading chamber. The volume of the furnace is 2500 liters.

To produce this model, steel grade 09G2S 6 mm thick is used. The weight of the boiler is 2900 kg.

At the first stage of production, the boiler is welded by a robot, then, if necessary, by a person. After welding, the boiler blank is pressurized (filled with high-pressure water) on a special stand under high pressure. This procedure guarantees the tightness of the boiler and its resistance to peak loads.

The boiler Marten Industrial MI-350 has a rectangular horizontal shape, which allowed to constructively extend the furnace. And now you can heat this boiler with firewood with a length of 1 m.

The main element of the construction of this boiler is a heat exchanger. Boiler heat exchanger The 350 kW boiler is made in the form of plates and is located in the back of the boiler. To increase the heat exchange area and reduce the aerodynamic resistance of the boiler, the heat exchanger has an inclined shape.

The boiler is equipped with pipe cooled grates, which are made of seamless pipes 6 mm thick.

The inner and outer walls of the jacket are interconnected by special screeds, which allow the boiler to withstand the pressure of the coolant. To ensure safety and reduce the heat loss of the boiler, it has an external shell under which is a heater.

The chimney has a circular section with a diameter of 400 mm.

The 350 kW boiler of the Marten Industrial boiler is equipped with the Polish automation TM TECH (very simple, reliable, with an intuitive interface). The control panel provides control of the air supply to the furnace and the operation of the circulation pump, which allows to achieve the longest period of the autonomous operation of the boiler without loading.

Boiler maintenance is reduced to removing ash from the ash box and cleaning the boiler's heat exchanger and the walls of the combustion chamber.

Access to the heat exchanger for its cleaning is carried out through the technological hatches located on top of the boiler. After cleaning, the ash falls to the bottom of the heat exchanger from where it must be removed through the side inspection doors.

The main advantages of the Marten Industrial 350 kW model:

✓ the possibility of using solid fuel in operation with practically humidity up to 60%;

✓ Increased efficiency - up to 87%;

✓ Extended boot chamber.

The model range of Marten Industrial boilers is manufactured according to TU U 25.2-21241245-002: 2016 and certified in the territory of Ukraine (certificate of conformity UA1.066.0027078-16).

The guarantee for the boiler is 36 months.

You can order a boiler on the site through the basket, after which the manager will contact you for clarifying and confirming the order. Or by phone. To place an order in the phone mode, you need to provide your full name, phone number and shipping address!

Also, you can visit our firm store of solid fuel boilers Marten in Kiev at the address:

Petropavlovskaya Borshchagovka

Ul. Lenina, 13

(second floor)

You can pay for the boiler in our store, at the bank for details or for an account (VAT included).

In order to receive an invoice with VAT it is necessary to send your company details to the mail: zakaz@marten.kiev.ua. In the subject line of the letter, indicate: "Account for (name of the boiler)".

For consultation, please call the numbers on this website.