100% Money
refund
Fast send
and delivery
Industrial firewood boiler Marten Industrial T MIT-700 kW
To familiarize yourself with the instruction manual for solid fuel boilers Marten, click on the corresponding picture:
Purpose and brief
description
Industrial firewood
boiler Marten Industrial T MIT-
700 kW is a
high-quality and inexpensive solution for heating domestic, industrial and
other premises with an area of up to 7000 m2, as well as for heating water (DHW) with
indirect heating boilers.
As fuel, wood, wood
waste, peat and peat briquettes, lump peat and coal are used. The fuel is
burned in the boiler chamber (furnace) on water-cooled (optionally - cast-iron)
grates with automatic air supply to the combustion zone with the help of a fan.
The combustion
process is controlled by a microprocessor controller.
The design of the
industrial solid fuel boiler Marten Industrial T MIT-700 kW
1. Boiler body
2. A
firebox
3. Return water
supply tubing
4. Direct Water
Supply Pipe
5. Sleeve for
controller sensor
6. Socket for relief
valve
7. Connection for
boiler safety group
8. Smoke output
9. Air injection fans
10. Rear audit hatch
11. Doors for
cleaning of combustion residues
12. Fuel loading
doors
13. Doors for
cleaning the heat exchanger
14. Rigging eyes
(staples)
15. Condensate
draining
16. Connection for
draining the coolant
17. Fire-tube beam
18. The first rotary
chamber
19. The second rotary
chamber
20. Zone of
collection of combustion residues
21. Air supply
openings
The boiler Marten
Industrial T MIT-700 kW is made of high-quality steel with a thickness of 6 mm.
The external steel walls of the boiler are painted by the high-temperature
powder coating method.
Structurally, the
boiler is a prefabricated welded structure consisting of three main parts: an
ash chamber (pos. 20), a combustion chamber (firebox) (pos.2) and a convective
beam of flame tubes (pos.17) inclined with respect to the horizontal axis of the
boiler.
On the front of the
boiler there are three doors. The upper doors are designed for cleaning the
heat exchanger. The averages are designed to control the flame, fuel loading
and ignition of the boiler, as well as to clean the inside surface of the furnace.
Lower doors are designed to remove ash from the boiler.
The fuel for the
boiler is loaded onto a grate made of thick-walled seamless pipes, through
which water constantly circulates, which makes it impossible for them to burn
out. The process of burning fuel in the furnace takes place with the
participation of air, which comes through the air supply holes (pos.21).
High-temperature
combustion products enter the first rotary chamber (post 18), then pass through
the heat-resistant pipes (pos.17), then through the second rotary chamber
(pos.19) again pass through the heat-resistant pipes and through the chimney
outlet (pos.8) are discharged from the boiler through the chimney.
The boiler top allows
burning the amount of fuel that is necessary to maintain the temperature set by
the user on the panel of the automation unit.
The controller
conducts permanent measurements of the water temperature in the boiler using a
sensor located on the top of the boiler (pos.5).
In the upper part of
the body there are rigging elements (pos.14),
are provided for
lifting the boiler with the help of load-lifting mechanisms.
Scope of supply of
industrial long-burning boiler:
1. The boiler
assembly
2. Automatic control
unit
3. The fan
4. Passport,
operating instructions for the boiler
5. Boiler cleaning
kit
The main advantages
of the model Marten Industrial T MIT-700 kW:
✓ the
possibility of using solid fuel in operation with humidity up to 60%;
✓
Universality - any type of solid fuel can be used;
✓
Robotic welding;
✓
heat-resistant steel with a thickness of 6 to 8 mm;
✓
Fire-tube heat exchanger;
✓
Two-way combustion chamber for solid fuel;
✓
water-filled grates;
✓
High efficiency - up to 87%;
✓
imported electronics (TM "TESN");
✓
powder painting.
The guarantee for the
boiler is 36 months.
You can order a
boiler on the site through the basket, after which the manager will contact you
for clarifying and confirming the order. Or by phone. To place an order in the
phone mode, you need to provide your full name, phone number and shipping address!
Also, you can visit
our firm store of solid fuel boilers Marten in Kiev at the address:
Petropavlovskaya
Borshchagovka
Ul. Lenina, 13
(second floor)
You can pay for the
boiler in our store, at the bank for details or for an account (VAT included).
In order to receive
an invoice with VAT it is necessary to send your company details to the mail: zakaz@marten.kiev.ua. In the subject line of the letter indicate:
"Account for the boiler (name of the boiler)."
For consultation,
please call the numbers on this website.
The main technical characteristics of the boiler | |
Volume of water in the boiler, l | 1600 |
Rated boiler output, kW | 700 |
Approximate heated area, m² | 7000 |
Fuel primary / alternate | Firewood, Anthracite, Fuel briquettes |
Heat exchange surface of the boiler, m² | 52 |
Efficiency at least, % | 86 |
Weight without water boiler, kg | 4100 |
The required flue gas chamber, Pa | 60-100 |
Flue gas temperature at the outlet from the boiler, ° C | 160-230 |
Recommended minimum water temperature, °C | 50 |
The size of the boiler furnace | |
The depth (length), mm | 1800 |
Volume, dm³ | 1520 |
Recommended parameters of the chimney | |
Cross-sectional area, m² | 400 |
The height (the minimum allowed), m | 18 |
Overall dimensions | |
(B) Width, mm | 1280 |
(L) The length (depth), mm | 2520 |
(H) Height, mm | 2460 |